Sharp MX-C528F User Manual

VoIP Settings
Menu item Description
VoIP Protocol
SIP*
H.323
Set the Voice over Internet Protocol (VoIP) protocol.
STUN Server Specify the STUN server to traverse a firewall.
Force Fax Mode
O
On*
Switch VoIP gateway from analog to T.38 at the beginning of a fax call.
Force Fax Mode Delay
0–15 (7*)
Set the time delay in seconds when sending another invite of Force Fax Mode.
Note: An asterisk (*) next to a value indicates the factory default setting.
SIP Settings
Menu item Description
Proxy Specify the IP address of the system that converts the phone number to an IP
address where the fax is sent.
Registrar Specify a name or IP address of the system that handles the registration of
Session Initiation Protocol (SIP) clients.
User Specify the name of the user for SIP.
Password Specify the password that is used in registering with the SIP Registrar.
Auth ID The user name that is used when registering.
Note: If the Auth ID setting is not set, the setting uses the user name of the
User field instead.
Transport For Registration
UDP*
TCP
Set the SIP transport type for registration.
Transport For Incoming Calls
UDP*
TCP
UDP And TCP
Set the SIP transport type for incoming calls.
Transport For Outgoing Calls
UDP*
TCP
Set the SIP transport type for outgoing calls.
Outbound Proxy Specify an outbound proxy to forward all SIP communication.
Contact Specify a contact name for SIP.
Realm Specify a realm name for SIP.
Note: If the Realm setting is not set, the setting uses the name of the Contact
instead.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 142

Sharp MX-C528F Specifications

General

Brand	Sharp
Model	MX-C528F
Category	All in One Printer
Language	English