5 Attach the controller board shield.
6 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing the convenience stapler
1 Turn
o
the printer, and then unplug the power cord from the electrical outlet.
2 Unpack the convenience stapler, and then remove all the packing material.
Set up, install, and configure 64
To Next Page
Loading...
Need help?
General
