Basic model
1 Automatic document feeder (ADF)
2 Control panel
3 Standard bin
4 Standard 550-sheet tray
5 Multipurpose feeder
6 Proximity sensor
Note: Available only in some printer units.
Configured model
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding an optional 2200‑sheet tray or a combination of up to three optional
550‑sheet trays or envelope trays.
Learning about the printer 12
To Next Page
Loading...
