Scanning to a flash drive
1 Load an original document into the ADF tray or on the scanner glass.
2 Insert the flash drive.
3 Tou ch Scan to USB and adjust the settings if necessary.
Notes:
• To save the scanned document to a folder, touch Scan to, select a folder, and then touch Scan Here.
• If the USB Drive screen does not appear, then touch USB Drive on the control panel.
4 Scan the document.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the
flash
drive or
the printer in the area shown while actively printing, reading, or writing from the memory device.
Scanning 66
To Next Page
Loading...
Need help?
General
