• Flex, fan, and align the paper edges before loading.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure that the paper size and type are set correctly on the computer or printer control panel.
• Store paper according to manufacturer recommendations.
Identifying jam locations
Notes:
• When Jam Assist is set to On, the printer
flushes
blank pages or pages with partial prints after a jammed
page has been cleared. Check your printed output for blank pages.
• When Jam Recovery is set to On or Auto, the printer reprints jammed pages.
Printer jam locations
1 Multipurpose feeder
2 Door B
3 Automatic document feeder (ADF)
4 Standard bin
5 Door G
6 Finisher bin
7 Trays
Clearing jams 194
To Next Page
Loading...
Need help?
General
