5 Unpack the new ADF separator roller.
6 Insert the new ADF separator roller until it clicks into place.
7 Insert the ADF separator roller cover until it clicks into place.
8 Close door D.
9 Turn on the printer.
Resetting the maintenance counter
1 From the home screen, touch Settings > Device > Maintenance >
Configuration
Menu > Supply Usage
And Counters.
2 Select Fuser Reset or ITM Reset.
Resetting the supply usage counters
1 From the home screen, touch Settings > Device > Maintenance >
Configuration
Menu > Supply Usage
And Counters.
2 Select the counter that you want to reset.
Warning—Potential Damage: Supplies and parts without use‑and‑return program agreement terms may be
reset and remanufactured. However, the manufacturer’s warranty does not cover any damage caused by
non-genuine supplies or parts. Resetting counters on the supply or part without proper remanufacturing can
cause damage to your printer. After resetting the supply or part counter, your printer may display an error
indicating the presence of the reset item.
Maintaining the printer 182
To Next Page
Loading...
