Sharp MX-M260 - When the Machine will be Connected with a Usb Cable

17
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
ENGLISH
WHEN THE MACHINE WILL BE CONNECTED
WITH A USB CABLE
Supported operating systems: Windows 2000
*
/XP
*
/Server 2003
*
/Vista
*
/Server 2008
*
* Administrator's rights are required to install the software.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1
Click the [Printer Driver] button.
2
Click the [Custom installation]
button.
3
When you are asked how the
printer is connected, select
[Connected to this computer]
and click the [Next] button.
4
When you are asked if you wish
to install the display fonts, select
an answer and click the [Next]
button.
• Make sure that a USB cable is not connected to your computer and the machine.
If a cable is connected, a Plug and Play window will appear. If this happens, click the [Cancel]
button to close the window and disconnect the cable.
• The PS3 expansion kit is required to use the PS printer driver or the PPD driver.
• To use the port created when the printer driver is installed for fax data transfer, install the printer
driver first and then install the PC-Fax driver.
Note
Setup_multi.book 17 ページ ２００９年７月７日 火曜日 午後２時８分