Name: Sharp MX-M260
Brand: Sharp
Rating: 5 (1 reviews)

To Next Page

To Previous Page

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

ENGLISH

Configure the image of the

machine.

An image of the machine is formed in the

printer driver configuration window based on

the options that are installed.

(1) Select the options that are

installed on the machine.

(2) Click the [OK] button.

Click the [OK] button in the

printer properties window.

To cancel the image settings, click the

[Cancel] button.

(2)

(1)

Note

If automatic configuration fails, configure the settings manually.

• You can check the options that are installed and the tray settings by printing out the "PRINTER

SETTINGS LIST" in the system settings of the machine. (However, note that "Input Tray

Options" must be set to the number of trays on the machine.) Follow these steps to print out the

"PRINTER SETTINGS LIST": Press the [SYSTEM SETTINGS] key, touch the [LIST PRINT] key,

touch the [PRINTER TEST PAGE] key, and then touch the [PRINTER SETTINGS LIST] key.

• Click the [Set Tray Status] button and then set the following items. Select a tray from the "Paper

source" menu, set the size of paper loaded in the tray from the "Set Paper Size" menu, and

select the type of paper from the "Set Paper Type" menu. Repeat for each of the trays.

Note

Setup_multi.book 25 ページ２００９年７月７日　火曜日　午後２時８分

Other manuals for Sharp MX-M260

Questions and Answers:

Need help?

Do you have a question about the Sharp MX-M260 and is the answer not in the manual?

General