EasyManuals Logo

Sharp MX-M310 Online Manual

Sharp MX-M310
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1
PRINTING FROM WINDOWS
8
CONTENTS
Basic printing
(part 2)
5
Click the "Print" button.
Printing begins.
When "Paper Selection" is set to "Auto Select"
If "Paper Selection" is set to "Auto Select" in the "Paper" tab of
the printer driver setup screen and the correct size of paper for
a print job is not loaded in the machine, the printing procedure
will vary depending on the "FORCED OUTPUT OF PRINT"
setting in the system settings (administrator) (see the
"SYSTEM SETTINGS (ADMINISTRATOR)" in the operation
manual).
When "FORCED OUTPUT OF PRINT" is disabled
If the bypass tray can be used, a message prompting you to
print from the bypass tray will appear in the touch panel.
Press the [PRINT] key on the operation panel, touch the
[BYPASS TRAY] key, load paper in the bypass tray, and then
touch the [BYPASS] key. Printing will begin automatically.
When "FORCED OUTPUT OF PRINT" is enabled
Printing will take place using a size of paper that is close to the
size of the print image.
The output tray can be selected in the system settings
(administrator) (see "OUTPUT TRAYS" in the
"SYSTEM SETTINGS (ADMINISTRATOR)" in the
operation manual).
The output tray can also be selected in the print
settings at the time of printing. To change the tray
selection, select the desired tray in "Output" in the
"Paper" tab of the printer driver setup screen.
Printing can be canceled in the job status screen.
Canceling a print job
If the paper type setting in the printer driver is different
from the bypass tray's paper type setting in the
machine, printing may stop. To resume printing, press
the [PRINT] key on the operation panel, touch the
[BYPASS TRAY] key in the touch panel, and specify
the same paper type as in the printer driver.
Note
If the paper is loaded in a different orientation than the
print image, the image is automatically rotated to match
the paper. This setting can be changed in the system
settings (administrator) (see "ROTATED PRINT" in the
"SYSTEM SETTINGS (ADMINISTRATOR)" in the
operation manual).
Note

Table of Contents

Other manuals for Sharp MX-M310

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-M310 and is the answer not in the manual?

Sharp MX-M310 Specifications

General IconGeneral
BrandSharp
ModelMX-M310
CategoryAll in One Printer
LanguageEnglish

Related product manuals