4
CONTENTS
Contents
(part 1)
Introduction 2
How to use the online manual 3
Basic printing 7
●
When "Paper Selection" is set to "Auto Select" 8
●
When the "Paper Selection" setting is "Paper Source" or "Paper Type"
9
●
Auditing mode 10
●
About the "No Offset" function setting 10
Opening the printer driver from the "start" button 11
Printer driver settings 12
Two-sided printing 13
●
Pamphlet style 14
Printing multiple pages on one page 15
Fitting the printed image to the paper 16
Rotating the print image 180 degrees 17
Enlarging/reducing the print image 18
Adjusting the brightness and contrast of the image 19
Saving frequently used print settings 20
Printing a watermark 21
●
How to Print a Watermark 21
Stapling printed pages (when a finisher is installed) 22
●
When a finisher is installed 22
Print hold function 23
Printing using the print hold function 24
●
Selecting print hold settings in the printer driver at the time of printing
24
●
How to print a print hold job 25
●
Points to note about the Print Hold function 26
Carbon copy print 27
Printing using carbon copy print 28
Printing text and lines in black 29
●
Printing text in black 29
●
Printing lines in black 29
Printer utilities 30
●
Before using the Printer Status Monitor 30
Using the printer utilities 31
●
Starting up the printer utilities 31
●
Using the printer utilities 31
●
Changing the Printer Status Monitor settings 32
●
Checking the printer status 33
1 PRINTING FROM WINDOWS
2 ADVANCED PRINTING (WINDOWS)
3 PRINTER UTILITIES (WINDOWS)
To Next Page
Loading...
Need help?
General
