Sharp MX-M310 - Service Manual

Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
SERVICE MANUAL
CONTENTS
CODE: 00ZMXM310/S1E
DIGITAL MULTIFUNCTIONAL
SYSTEM
MX-M260/M310
MODEL MX-M260N/M310N
NOTE FOR SERVICING
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[4] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . . 4-1
[5] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] SELF DIAG AND TROUBLE CODE . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] FIRMWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Sharp MX-M310 Specifications

General

Brand	Sharp
Model	MX-M310
Category	All in One Printer
Language	English

Summary

NOTE FOR SERVICING

1. Warning for Servicing

Critical safety warnings for servicing, focusing on electrical hazards, grounding, and cord handling.

2. Precautions for Servicing

General safety guidelines for servicing, including high-temperature areas, high voltage, laser units, and chemical handling.

3. Notes for Installing Site

4. Notes for Repairing;Replacing LSU

[2] SPECIFICATIONS

1. Basic Function

Details the fundamental specifications of the base engine, including dimensions, warmup, and first copy time.

D. Scanner Section

E. Paper Feed Section

H. Printer Function

J. Environmental Conditions

[3] CONSUMABLE PARTS

1. Supply System Table

Lists consumable parts, their content, life expectancy, model names, and notes, categorized by region.

2. Maintenance Parts List

3. Developer;Drum Life End Definition

[4] EXTERNAL VIEW AND INTERNAL STRUCTURE

1. External View

Illustrates the exterior of the machine, identifying all external parts and their functions.

2. Internal Structure

3. Operation Panel

4. RSPF

[5] ADJUSTMENTS

1. Adjustment Item List

An index of all adjustable parameters, including adjustment procedures and SIM numbers for various sections.

2. Details of Adjustment

Provides detailed instructions and specifications for performing machine adjustments across different sections.

C. Image Density (Exposure) Adjustment

[6] SIMULATION

1. General

An overview of the simulation mode's purpose, functions, and general operating procedures for accessing various tests and settings.

2. Simulation Code List

A comprehensive catalog of simulation codes, detailing their functions and the main/sub codes required to access them.

3. Details of Simulation

[7] SELF DIAG AND TROUBLE CODE

1. Trouble Code List

A categorized list of all possible trouble codes, their descriptions, and the detection methods used by the machine.

2. Details of Trouble Code

Explains the specific causes and recommended remedies for each listed trouble code, aiding in diagnosis and repair.

[8] MAINTENANCE

1. Maintenance List

A schedule detailing maintenance actions (cleaning, replacement, lubrication) for various parts at different service intervals.

2. Details of Maintenance

Provides detailed procedures for disassembling and maintaining specific machine units and components.

[9] FIRMWARE UPDATE

1. Firmware Update Procedure

Outlines the necessary items and step-by-step instructions for updating the machine's firmware using a PC.

C. Others (Troubleshooting)

[10] ELECTRICAL SECTION

1. Block Diagram

Illustrates the system's overall block diagram, showing interconnections between major components and PWBs.

3. Signal List