1-130
BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
Original Feeding Mode
The following original feeding modes can be set to operate by default in copy, image send, and scan to HDD. When a
mode is frequently used, this saves you from having to select the mode in another mode each time you need to use it.
• Mixed Size Doc. Different Width
• Slow Scan Mode
• Blank Page Skip
*
* Excluding fax mode and Internet fax mode.
Plain Paper Compatibility Settings
Set the weight of the plain paper that is regularly used. Select from Plain Paper 1 or Plain Paper 2.
The weight of Plain Paper 1 is 16 to 24 lbs bond (60 to 89 g/m
2
). The weig
ht of Plain Paper 2 is 24 to 28 lbs bond (90 to
105 g/m
2
). Check the weight of the plain paper that you regularly use, and set accordingly.
Initial Original Count Setting
Specifies whether or not "Original Count" in Others is enabled for each function.
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Condition Settings]
→ [Initial Original Count Setting].
The following settings can be configured.
Copy
•Copy
Image Send
• Scan to
• Internet Fax
•Fax
•Data Entry
Document Filing
• Scan to HDD
To Next Page
Loading...
