2-45
COPIER►BASIC PROCEDURE FOR MAKING COPIES
PUNCH SETTINGS
This function punches copies and outputs them to the tray.
Example
Original Orientation
Punch Position
Left Top Right
OFF Does not punch.
Portrait orientation
Landscape orientation
• To change the default punch settings:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Punch].
• Punch positions are linked to staple positions.
• You can view punch positions on the "PREVIEW SCREEN
(page 1-20)".
• A punch module is required for paper punch.
• You cannot use 12" x 18" (A3W) size paper or special media such as transparency film and tab paper.
• You cannot use a paper punch together with the staple and paper folding. The punch function can be used in combination
with the Z-Fold function when A3, B4 or 11"x17" is used.
Original 1 Punch Positions
Original 2 Punch Positions
To Next Page
Loading...
