4-92
FACSIMILEâ–ºOTHERS FUNCTION
OPERATING FAX TRANSMISSION AND
RECEPTION REMOTELY
CALLING A FAX MACHINE AND INITIATING
RECEPTION (POLLING)
When you connect to another machine and receive a document from it, this is called "Polling".
The document reception from another machine is called "Polling Reception".
You can enter multiple destination numbers. When you enter multiple destination numbers, the document is received by
polling in the sequence you have entered the destination numbers.
Document reception by polling from multiple machines is called "Serial Polling".
Use the manual polling reception when you must start polling after listening to a recorded greeting, such as when using
a fax information service.
• Make sure there is no original in the machine when using the polling reception function.
• The function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
• The receiving machine bears the expense (phone charges) of the polling reception.
• If necessary, this function can be combined with the timer transmission to perform the polling reception at any time such as
at night or when you are not present. (Only one timer polling reception can be set.)
(1) Requests fax transmission
Memory Box
Send
(3) The fax is received.
(2) The prepared document is transmitted.
To Next Page
Loading...
Need help?
General
