Sharp MX-M6570

4-37
FACSIMILE►BASIC TRANSMISSION METHODS
RESENDING TO UNSUCCESSFUL BROADCAST
TRANSMISSION DESTINATIONS
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
To cancel a specified destination:
Select the address you want to cancel in the address list screen, and tap the [Delete] key.
5
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED
(page 4-27)".
1
Tap the job status display, and tapping
the [Fax] tab.
2
Tap the [Complete] key.
3
After tapping the key of the completed
broadcast transmission, tap [Check
Details of Selected Job] on the action
panel.
Job Queue
Complete
Internet FaxFaxScan
Job
Address
Set Time
StatusPages
Print
Check Details of
Selected Job
Stop/Delete
Enter Multi
Selection Mode
Display Only
Own Job
Check Confidential
Reception Data
Back
Waiting
000110:45 07/07Broadcast
Job Queue
Complete
Internet FaxFaxScan
Job
Address
Set Time
StatusPages
Print
Check Details of
Selected Job
Back
000110:50 07/07
0001/0005 OK
0001/0005 OK
0001/0005 OK
Busy
0002/000210:45 07/07Broadcast001
0002/000210:40 07/07
0002/000210:35 07/07
Broadcast003
27
Busy0002/000210:30 07/0727
Busy0002/000210:25 07/0727
Busy0002/000210:20 07/0727
Busy0002/000210:15 07/0727
Busy0002/000210:10 07/0727
Print Image Sending
Activity Report