1-37
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
ECO SCAN
Non-print jobs such as sending a scanned original are performed with the fusing unit turned off.
Eco Scan Setting
Eco Scan Setting is used to execute a non-print operation such as image sending and scan to HDD while the fusing unit
is turned Off.
Set "Eco Scan Setting" to , and select a mode or screen in which to enable Eco Scan Setting.
The following modes and screens can be set.
• Home Screen
• Copy
• Image Send
• Document Filing
•System Settings
• Sharp OSA
• Manual Finishing
To set Eco scan:
"Settings (administrator)" → select [System Settings] → [Energy Save] → [Eco Setting] → [Eco Scan Setting] .
1
L
L
L
H
Fusing unit is
turned off
Image Send
Document Filing
Copy
Fusing unit is
turned on
Fusing unit is
turned off
Print
Sleep mode
To Next Page
Loading...
