Sharp MX-M6570

1-167
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
4
Remove the empty staple cartridge
from the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.
6
Replace the staple case.
Push the staple case in until it clicks into place.
7
Slide the finisher back to the right.
Gently slide the finisher back to the right until it locks into its
original position.
8
Close the finisher front cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.