2-29
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the orientation and size of a non-standard size originals
5
Tap the appropriate original size key.
After the settings are completed, tap .
1
Tap the [Original] key to set the orientation of the original.
► COPY MODE (page 2-3)
2
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-19)
3
Tap the [Original] key.
4
Tap the [Direct Entry] tab.
5
Specify the original size.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use to finely adjust the entered size.
6
Tap the [Execute] key.
On the base screen, check that the specified size is displayed on the [Original] key.
After the settings are completed, tap .
Original
Others
Auto
Direct Entry
InchAB Custom Size
No. of copies
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
8½x11
1
Image Orientation
5 ½x8 ½ 8 ½x11R 11x17
5 ½x8 ½R 8 ½x13
8 ½x11 8 ½x14
8 ½x13
2
/
5
Proof Copy
CAPreview
Start
3
4
11x17
8½x14
8½x11
Original
Others
Auto
Direct Entry
InchAB Custom Size
No. of copies
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
8½x11
11
17
( 1~11 5/8 )
inch
( 1~17 )
inch
X
Y
Execute
1
Image Orientation
Proof Copy
CAPreview
Start
3
4
11x17
8½x14
8½x11
To Next Page
Loading...
