8-30
SYSTEM SETTINGS►SETTING MODE LIST
Paper Type for Auto Paper Selection
Plain 1: Enabled, Plain 2:
Enabled, Recycled:
Disabled
No Yes 8-74
Plain Paper Compatibility Settings Plain 1 No Yes 1-106
Tandem Connection Setting No Yes
8-74
• IP Address of Client Machine 0.0.0.0 No Yes
• Port Number 50001 No Yes
• Tandem Mode No Yes
- Disabling of Master Machine Mode Disabled No Yes
- Disabling of Client Machine Mode Disabled No Yes
Detect Standard in Auto Color Mode 3 (Normal) No Yes
Auto Switching of Finisher Trays*
5
Enabled No Yes
Data Indicator Setting Pattern 1 No Yes
• Status Indicator will blink if data is received Enabled No Yes
• Error Light Setting Light & Blink No Yes
Total Setting for Finish Specify Finishing
Position Based on
Paper Selected.
No Yes
Plain Paper Weight Settings No Yes
• Paper Weight 16 to 23 lbs. (60 to
89g/m
2
)
No Yes
Data List One Sided No Yes
Disabling of Duplex Disabled No Yes
Disabling of Offset Disabled No Yes
Disabling of Stapler*
6
Disabled No Yes
8-75
Disabling of Punch*
7
Disabled No Yes
Disabling of Document Feeder Disabled No Yes
Disabling of Large Capacity Cassette*
1
Disabled No Yes
Disabling of Optional Paper Drawer Disabled No Yes
Disabling of Tray Settings Disabled No Yes
Disabling of Inserter*
2
Disabled No Yes
Disabling of Finisher*
6
Disabled No Yes
Disabling of Folding Unit*
8
Disabled No Yes
Disabling of Trimming Module*
9
Disabled No Yes
Enable/Disable Settings
User Control
• Disabling of Printing by Invalid User Disabled No Yes 1-55
Copy Function Settings
• Disabling of Registration/Deletion of Program Disabled No Yes 2-137
Setup Items
Factory default setting
U A Page
To Next Page
Loading...
