8-53
SYSTEM SETTINGS►STATUS
Network Status
The Network Status screen shows the general status information and the statuses relevant to, TCP/IP, DNS, and WINS
protocols.
The information displayed here consists of the items that are configured in the Network Settings and their settings. For
information on each item, refer to
"Network Settings (page 8-78)".
Firmware Version
Shows the firmware version of the machine as a list.
Power Reset
The Power Reset screen enables you to restart the machine or enter the power save mode.
This function requires administrator rights.
Item Description
Reboot the MFP
Reboots the machine.
Tapping the [Execute] key opens the Restart screen, and then tapping the [Execute] key
again restarts the machine.
Enter the Power Save Mode
Shifts the machine to power save mode.
Tap the [Execute] key to open the power save mode screen.
To Next Page
Loading...
