33
PG-B10S
UPGRADING THE VERSION
1) Prepare the RS232C cross cable and conversion cable at hand.
1. Connections
Connect the RS232C cross cable to a computer (Windows98 and higher OS), and the conversion cable to the
set.
2. Do not connect the AC power cord yet at this time.
2) Upgrading procedure
1. For upgrading the PG-B10S, use the "Flash Upgrader" program.
2. Decompress the attached file, and a folder is created.
3. Double-click on "FlashUpgrader.exe", and the following window appears
4. Click on the "Choose" button, and the following window appears.
To Next Page
Loading...
Need help?
General