Sharp PN-L702B - Tray; Mounting Precautions (for SHARP Dealers and Service Engineers)

57
E
• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast4people.
• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.
• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• ToattachaVESA-compliantmountingbracket,useM6screwsthatare5/16inch(8mm)to3/8inch(10mm)longerthanthe
thickness of the mounting bracket.
• Aftermounting,pleasecarefullyensurethemonitorissecure,andnotabletocomeloosefromthewallormount.
• DonotuseanyscrewholesotherthanVESAholesforinstallation.
Mounting Precautions
(For SHARP dealers and service engineers)
n
Attaching the Tray
1. Remove the cover from the back of the monitor.
2. Secure the tray mounting tting.
Secureusingthescrewremovedinstep1and2M5tray
mountingscrews(supplied).
Screw removed in step 1
Cover (supplied)
Bracket (supplied)
M5 tray mounting screws
(supplied)
Tray mounting
fitting
(3)
(2)
(1)
3. Secure the tray.
Insertthetrayintothetraymountingttingandsecurewith
2M4traymountingscrews(supplied).
Tray
(supplied)
M4 tray mounting screws
(supplied)