EasyManuals Logo

Sharp PN-L702B User Manual

Sharp PN-L702B
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
E
MOUNTING PRECAUTIONS
• Thisproductisforuseindoors.
• AmountingbracketcompliantwithVESAspecicationsis
required.
• Sincethemonitorisheavy,consultyourdealerbefore
installing, removing or moving the monitor.
• Mountingthemonitoronthewallrequiresspecialexpertise
andtheworkmustbeperformedbyanauthorizedSHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
foraccidentsorinjuriescausedbyimpropermountingor
mishandling.
• Thismonitorcannotbeusedinverticalorientation.
• Usethemonitorwiththesurfaceperpendiculartoalevel
surface.Ifnecessary,themonitormaybetiltedupto20
degrees upward.
• Whenmovingthemonitor,besuretoholditwitheitherboth
handlesorthe4cornersonthebottomoftheunit.Donot
place your hand on the screen. This may cause product
damage,failure,orinjury.
• Thismonitorshouldbeusedatanambienttemperature
between41°F(5°C)and95°F(35°C).Provideenough
space around the monitor to prevent heat from
accumulating inside.
7-7/8 [20]
Unit: inch [cm]
2 [5]
2
[5]
2
[5]
1-7/16 [3.5]
• Ifitisdifculttoprovidesufcientspaceforanyreason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of41°F(5°C)to95°F(35°C),installafanortakeother
measures to keep the ambient temperature within the
requiredrange.
• Temperatureconditionmaychangewhenusingthemonitor
togetherwiththeoptionalequipmentsrecommendedby
SHARP. In such cases, please check the temperature
conditionspeciedbytheoptionalequipments.
• Donotblockanyventilationopenings.Ifthetemperature
inside the monitor rises, this could lead to a malfunction.
• Donotplacethemonitoronadevicewhichgeneratesheat.
• Donotusetheproductinlocationswheretheunitis
exposed to direct sunlight or other strong light. Since this
product operates with infrared rays, such light may cause a
malfunction.

Table of Contents

Other manuals for Sharp PN-L702B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp PN-L702B and is the answer not in the manual?

Sharp PN-L702B Specifications

General IconGeneral
Pixel pitch0.802 x 0.802 mm
Aspect ratio16:9
Screen shapeFlat
Response time6 ms
Composite syncYes
Display diagonal60 \
Display brightness300 cd/m²
Display technologyLCD
Contrast ratio (typical)3000:1
Display number of colors1.073 billion colors
Viewing angle, horizontal160 °
CertificationUL 60950, FCC
Product colorBlack
Bezel width41 mm
Placement supportedHorizontal
Ethernet LAN (RJ-45) ports1
Display viewable area (HxV)1538.2875 x 865.1875 mm
Number of products included1 pc(s)
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)1 W
Power consumption (typical)240 W
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Package weight82100 g
Camera includedNo
RMS rated power14 W
Number of speakers2
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)115.8875 mm
Width (without stand)1647.825 mm
Height (without stand)982.6625 mm
Weight (without stand)70000 g

Related product manuals