48
I
I
I
I
I
I
I
SUPPLIES
I
PAPER
Types and sizes of copy paper
Size Weight Capacity (80 g/m
2
Special paper
(20 lb.) paper)
Paper Tray 1 A4 (8-1/2" x 11") 60 to 90 g/m
2
2,000 sheets
(16 lbs. to 24 lbs.)
Paper Tray 2 A4 to A3, 8-1/2" x 11", 60 to 128 g/m
2
1,000 sheets
Paper Tray 3 8-1/2" x 14"
*
(16 lbs. to 32 lbs.)
(8-1/2" x 11" to
11" x 17", A4)
Bypass Tray A5 to A3, 8-1/2" x 11" 50 to 128 g/m
2
100 sheets Cover stock (176 g/m
2
(8-1/2" x 13"
**
) (13 lbs. to 32 lbs.) (65 lbs.)), index stock
(8-1/2" x 5-1/2" to (Ordinary paper) (200 g/m
2
(110 lbs.)),trans-
11" x 17", A4) parency film, labels
●
For best results, use only paper recommended by SHARP.
●
Labels must be set face up in the bypass tray.
●
Do not use 8-1/2" x 11"R (A4R) paper in any tray because it will be
regarded as A4R (8-1/2" x 11"R) paper, causing a misfeed.
*
8-1/2" x 13" paper can be selected instead of 8-1/2" x 14" in cer-
tain areas.
**
8-1/2" x 13" paper can be selected in certain areas.
Loading copy paper
The paper trays will automatically lower when they run out of paper.
Paper can be loaded into a paper tray that is not in use while copying is in progress.
Loading paper in paper tray 1
Press the release button on the paper tray.
●
The release button lamp will blink while the feed table is lower-
ing and will go out when the tray is ready to be opened.
When the release button lamp goes out, pull out the
paper tray.
●
Do not pull out the paper tray before the release button lamp
goes out.
Fan the copy paper.
1
2
3
Paper
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
