5
GETTING STARTED
I
I
I
I
I
I
I
I
11"R, 8-1/2" x 14", 11" x 17", or A4 size paper.)
Tray capacity is 1,000 sheets of 80 g/m
2
(20 lb.)
paper.
* Can be selected in certain areas.
!9 Paper tray 3
Can be adjusted to accommodate A4, B4, A3,
A4R, 8-1/2" x 11" or 8-1/2" x 14" (8-1/2" x 13"*)
size paper. (Inch system machines can be ad-
justed to accommodate 8-1/2" x 11", 8-1/2" x
11"R, 8-1/2" x 14", 11" x 17", or A4 size paper.)
Tray capacity is 1,000 sheets of 80 g/m
2
(20 lb.)
paper.
* Can be selected in certain areas.
@0 Paper tray release buttons and indicators
Press to lower the feed tables for tray access.
@1 Paper tray 1
Holds A4 (8-1/2" x 11") size paper. Tray capacity
is 2,000 sheets of 80 g/m
2
(20 lb.) paper.
@2 Manual holder
Keep the Operation Manual here for handy ref-
erence.
@3 Fusing unit handle
Pull on the handle to pull out the fusing unit.
@4 Photoconductive drum
Copy images are formed on the drum.
@5 Toner collecting container cover
Open to replace used toner collecting container.
(Detailed description on page 51.)
★ KEY OPERATOR Replace the container when
the message “REPLACE USED TONER CON-
TAINER” appears.
@6 Side door
Open to remove misfeeds in the duplex inverter
section.
@7 Duplex section
Duplex copies are inverted here and transported
to the duplex tray.
@8 Roller rotating knobs
Turn as indicated to remove misfed paper.
@9 Duplex tray
Duplex copies are deposited here before being
copied on the second side.
#0 Transport lever
Turn and pull on the lever to draw out the trans-
port section for misfeed removal.
Accessories
Operation manual ....................... 1
Key operator’s guide .................. 1
Corona cleaner........................... 1
Part locations and functions
PART LOCATIONS AND FUNCTIONS
Interior
@2 @3 @4
@6
@5 @7
@8
@9
#0
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
