Sharp SF-2022 - Page 25

INTERRUPT is used to interrupt a long copy run so that
another job can be done.
INTERRUPT does not function during duplex copying. Also
note that duplex copies cannot be made during the
INTERRUPT mode.
Press the INTERRUPT key.
me uTEFMUET
When the Copier stops, set the new original.
Select the desired Copier functions.
Set the copy number.
Press the print button.
When all INTERRUPT copies are finished, press the
INTERRUPT key again to cancel the INTERRUPT
mode.
®@ The previous copy number, copy ratio, and paper size will be
automatically reset.
Set the original{s) for the interrupted job and press
the print button.
23
2
>
bay
2
fe)
Q
fo]
a}
m
n
uni Adioo 2 Buydnueyu]