11
MAKING COPIES
Two-sided copying with manual feed tray
Two-sided copies can be made using the manual feed tray.
USING THE MANUAL FEED TRAY (special paper)
Using the manual feed tray (special paper)
1
Place the first original face down on the document
glass and make a copy.
●
The first side of the copy can be made using any of the paper
feed stations.
2
Replace the first original with the second original and
close the document cover.
●
Make sure the first and second originals are oriented in the
same way on the document glass.
3
Turn the first copy over without changing its top-
bottom orientation and place it into the manual feed
tray.
●
Be sure to feed the copies one sheet at a time.
4
Use the TRAY SELECT key to select the manual feed
tray.
5
Press the START key.
To Next Page
Loading...
