63
OPTIONAL
EQUIPMENT
20-BIN STAPLE SORTER (SF-S56)
20-bin staple sorter (SF-S56)
1
Align the edges of the copies to be stapled.
2
Place the set of copies into the top bin, making sure the
edges are flush with the inner right corner, as shown in
the figure.
●
Make sure that there is no paper in the other sort bins. If there
is, the manual staple key will not light up.
●
Up to 50 sheets of paper can be stapled together. Exceeding
this maximum may result in damage to the stapler.
3
Press the manual staple key when it lights up.
●
The set of copies will be stapled.
Manual stapling
To use the stapling feature only, without using the STAPLE SORT
mode, follow the procedure below.
Stapling location
Copies
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
