Sharp SF-2540 - Automatic Reduction;Enlargement

54
OPTIONAL EQUIPMENT
RADF (SF-A58)
1
Adjust the original guides to the size of the originals
and set the originals face up in the document feeder
tray.
●
The original size will be detected and indicated in the message
display.
2
Use the TRAY SELECT key to select the paper tray with
the desired paper size.
NOTE:
This feature will not work when original or copy paper is of non-
standard size.
3
Press the AUTO IMAGE key.
●
The best reduction or enlargement ratio for the selected paper
size will be automatically set.
●
If the size and orientation of the original do not correspond to
standard reduction/enlargement ratios for the selected paper
tray, then the following message will appear to indicate how
the original should be placed.
ROTATE ORIGINAL 90° FROM TO .
4
Enter the desired number of copies.
5
Press the START key.
●
To cancel the automatic reduction/enlargement mode, press
the 100% key.
RADF (SF-A58)
Automatic reduction/enlargement
Reduction and enlargement ratios can be selected automatically
with the AUTO IMAGE key.
LIGHT DARK
TRAY SELECT
EXPOSURE
AUTO
MANUAL
PHOTO
1 0 0 %
COPY RATIO
EXPOSURE
ORIGINAL
AUTO
A4
A4
1.
A3
2.
ZOOM
AUTO
IMAGE
UMBER
UMBER
)
O COPY
1
23
45
6
7
0
C
8
9
AUDIT CLEAR
START
Downloaded From ManualsPrinter.com Manuals