95
KEY OPERATOR PROGRAMS
Key operator programs
P75 Disabling of Duplex Copying
Program P75 is used to enable or disable the optional duplex
system. If a malfunction occurs within the duplex system of the
copier, the system can be disabled until it is serviced. The rest of the
copier in the meantime will remain operable.
When P75 is entered, the following message will appear.
P75: DISABLING OF DUPLEX COPYING.
1.YES 2.NO
To disable the duplex system, press key 1.
To enable the duplex system, press key 2.
P76 Disabling of Stapler
Program P76 is used to enable or disable the stapler of the optional
staple sorter. If the stapler malfunctions, it can be disabled to prevent
further malfunction or possible damage to the stapler until it is
serviced.
When P76 is entered, the following message will appear.
P76: DISABLING OF STAPLER.
1.YES 2.NO
To disable the stapler, press key 1.
To enable the stapler, press key 2.
P77 Disabling of Covers
Program P77 is used to prevent the selection of the COVERS mode.
When P77 is entered, the following message will appear.
P77: DISABLING OF COVERS MODE.
1.YES 2.NO
To disable the COVERS mode, press key 1.
To restore use of the mode, press key 2.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
