Sharp UX-P200 - Sending a Fax by Automatic Dialing

Sending a Fax by Automatic Dialing
28
Sending a Fax by Automatic Dialing
You can store up to 30 fax or phone numbers in the machine for automatic
dialing.
♦ Auto-dial numbers are dialed by pressing until the desired number
appears in the display, and then .
Storing fax and phone numbers for automatic dialing
START/MEMORY
1 Press once and once.
2 Press once.
3 Enter the fax or voice number by pressing the number keys.
(Note: A space cannot be entered.)
• To clear a mistake, press .
• If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
4 Press
FUNCTION
SPEAKER
FUNCTION
START/MEMORY
5 When you hear the fax tone, press . Replace the handset if you
used it.
• When transmission is completed, the fax will beep once.
START/MEMORY
Display:
ENTER FAX #
<NEW NUMBER>
all.bookPage28Monday,August6,20012:24PM