16
VC-A565U/H965U (11-22)
Dimensions: 257 ⳯ 182 mm
• If the clock is not set, the time and date will not be displayed.
• Stereo/SAP and Audio Output modes are only for Hi-Fi model.
How to Display Indicators
Each time ON SCREEN is pressed, the screen changes as follows:
AUTO Display
When an operation button, numbered button or CH ∂/ƒ is pressed, the current function status or the number
of the channel will be displayed in the upper section of the TV screen for about 3 seconds.
• When the VCR power is turned off, the display mode is retained in memory.
• When you record a video signal output from this VCR on another VCR, press ON SCREEN to select Display Off. (If the
function status is displayed on the screen, it is also recorded on the tape.)
MENU screen is a home screen used to select various screen functions. A sub-
menu will appear once you select an item from the menu.
! Turn on the TV and select the video channel. (See Setting the 3 ↔ 4
Output Channel on page 11.)
@ Press POWER and then TV/VCR to select “VCR” (“VCR” will light on the
multi-function display).
# Press MENU to display the MENU screen.
The following 5 items can be set by using the MENU screen.
TIMER............................... Setting a timer recording (and checking it). (See page 31.)
SET UP ............................. VCR operating conditions are set according to the broadcast reception and tape
playback conditions. (See page 23.)
CHANNEL PRESET .......... Setting the channels. (See page 21.)
CLOCK ............................. Setting the present time. (See pages 18–20.)
LANGUAGE ..................... Selection of language to be used for the MENU screen. (See page 18.)
$ Press ∂/ƒ and then SET. The screen changes to the one which you have selected.
% To cancel the MENU screen, press MENU.
Menu Screen
To facilitate the operation and check the current VCR mode information, the following OSD (On Screen Display)
will appear on the TV screen when using this VCR.
OSD (On Screen Display)
Programme channel position
Real time counter
Tape speed
Clock display
Calendar display
Simple Recording Timer
Display example
Sharp Super Picture
DPSS
Audio Output mode
Stereo/SAP mode
- - - - - - - Function status
PLAY
FF
REW
STOP
REC
PAUSE
Play
Fast
forward
Rewind
Stop
Rec
Rec
pause
Recorded Section
Auto Repeat
PLAY
(When you press
REC while you are
receiving CH 9.)
(When you press
PLAY)
! AUTO Display @ FULL Display # COUNTER Display $ Display off
SET UP
MENU
ENTER :SET EXIT :MENU
CHANNEL PRESET
SELECT :
CLOCK
LANGUAGE
TIMER
STOP 123
THU 4/25 DPSS 19
S. PICTURE ON STEREO
10:00AM 1:59.59
SP STOP 11:30AM SAPSAP
L R
To Next Page
Loading...
