Sharp VC-H965U

26
VC-A565U/VC-H965U (26-36)
Dimensions: 257 ⳯ 182 mm
Quick Start with Full Loading Mechanism
Your VCR has a standby function (Full Loading Mechanism) to allow immediate recording and playback.
After pressing REC or PLAY, it takes about 2 seconds until recording or playback is engaged when in the
standby mode.
Full Automatic Playback
The Full Automatic Playback lets you enjoy playback with ease. When you insert a cassette with the erasure
protection tab removed, your VCR automatically turns on the power and playback the tape. When the tape
reaches its end, the VCR automatically rewinds the tape, turns its power off and ejects the tape.
• If the erasure protection hole is covered, press PLAY after the power turns on automatically.
Automatic Head Cleaning System
When the tape is inserted or ejected, this system automatically cleans the drum and heads with a special
roller before recording or playback begins, protecting the heads and drum from dirt and preserving beautiful
sound and picture quality.
Only for Hi-Fi model
Audio Output Mode
Your VCR has 3 channels for audio recording (2 on the Hi-Fi track and 1 on the linear track). You can select the
audio output channels in playback mode on the SET UP–selection screen. The following shows which audio
channels will be heard when a stereo Hi-Fi video cassette is playback while a stereo system is properly
connected to the VCR.
(See Mode Selection.)
Hi-Fi
Ⳮ mode:
Normally, select Hi-Fi Ⳮ mode on the SET UP–
selection screen: both the left (L) and right (R) audio
channels will be taken from the Hi-Fi audio track.
Normally you will not have to change to another
mode.
(See Recording MTS (Multi-channel TV Sound)
Broadcasts.)
Hi-Fi
mode:
The left channel of the Hi-Fi audio track will be playback through both speakers.
Hi-Fi mode:
The right channel of the Hi-Fi audio track will be playback through both speakers.
Linear mode:
The audio signal recorded on the linear audio track will be playback through both speakers.
• When video cassettes recorded on a non-Hi-Fi VCR are playback or the Hi-Fi audio output level is poor, the audio signal
recorded on the linear audio track will automatically be playback regardless of the audio output mode.
Playback
SELECT : CHANGE:
BLUE SCREEN ON OFF
AUTO REPEAT ON OFF
ENTER :SET EXIT :MENU
AUDIO OUTPUT
SAP ON OFF
MONO LR L R
Hi-FiL+R mode
Hi-FiL mode
LR
L
R
Linear mode
MONO
Hi-FiR mode