9
Dimensions: 257 ⳯ 182 mm
VC-A565U/VC-H965U (01-10)
Using the Universal Remote Control
How to set the Universal Remote Control code
The Universal Remote Control may operate the basic functions of 20 different types of TVs, 18 different types of
Cable Boxes and 2 different types of Digital Satellite Receivers.
To enter the Universal Remote Control code for your TV, Cable Box or Digital Satellite Receiver, follow the in-
structions below.
For Cable Box or Digital Satellite Receiver Setting
Setting the Manufacturer’s Code Directly
! Press CABLE/SAT. and CH ∂ on the remote
control simultaneously.
@ Enter the 2-digit manufacturer’s code with the
numbered buttons (Ex. 02 ⳱ “0”, “2”) on the
remote control within 10 seconds after releasing
CABLE/SAT. and CH ∂.
# Point the remote control towards the device.
Press CABLE/SAT. and release. Press POWER.
If the TV turns on/off, setup was successful. If
not, repeat the procedure using another code.
• Refer to the code list for the buttons which work with each
brand.
• SAT. stands for Digital Satellite Receiver.
There is no guarantee that the universal remote control will func-
tion with your TV, cable box or digital satellite receiver.
For TV Setting
Setting the Manufacturer’s Code Directly
! Press TV and CH ∂ on the remote control
simultaneously.
@ Enter the 2-digit manufacturer’s code with the
numbered buttons (Ex. 02 ⳱ “0”, “2”) on the
remote control within 10 seconds after releasing
TV and CH ∂.
# Point the remote control towards the TV. Press TV
and release. Press POWER. If the TV turns on/off,
setup was successful. If not, repeat the
procedure using another code.
• Refer to the code list for the buttons which work with each
brand.
How to operate the VCR, TV, Cable Box or Digital Satellite Receiver
To operate the VCR, TV, Cable Box or Digital Satellite Receiver, first press VCR, TV or CABLE/SAT. to switch to
the desired mode, then press the button for the feature you wish to use.
• If the batteries in the remote control are changed, the code settings must be re-entered.
• Some brands have more than one remote code listed, due to changes in the remote codes. In such cases, try more than
one code to find the code that operates your TV, Cable Box or Digital Satellite Receiver.
EMERSON
FISHER
FUNAI
GE
GOLDSTAR
HITACHI
JVC
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SAMSUNG
SANYO
SHARP
SONY
TOSHIBA
ZENITH
18
16
05
06, 08
17
14
15
08
10
13
12, 20
06, 08
19
16
01
02
09
11
04
07
–
100
100
100
–
100
100
100
–
–
–
100
–
100
100
–
100/ENT.
100
ENT.
100/ENT.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
TECHNOL ACE
03
–
X
X
X
–
–
X
X
–
X
X
X
–
X
X
X
X
X
X
X
–
XX
X
X
X
01, 04, 05, 06, 07
02, 03, 08
16
13
14
18
15
13
14
19
17
09, 10, 11
20
12
ENT.
–
ENT.
–
ENT.
–
ENT.
–
ENT.
–
–
–
ENT.
ENT.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
JERROLD
OAK
PANASONIC
PHILIPS
PIONEER
RCA
*RCA (SAT.)
REGAL
SCIENTIFIC ATLANTA
SONY (SAT.)
ZENITH
* Only for RCA (SAT.)
POWER ON–CABLE/SAT. button
POWER OFF–POWER button
To Next Page
Loading...
