30
VC-A565U/VC-H965U (26-36)
Dimensions: 257 ⳯ 182 mm
The Simple Recording Timer (SRT) enables you to set the recording stop time. The SRT can be set on the TV
screen by using the remote control.
The SRT cannot be set if the clock has not been set. Make sure the clock is set before setting the SRT.
• Turn on the TV and select the video channel. (See Setting the 3 ↔ 4 Output Channel.)
• Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically.
• Press TV/VCR to select “VCR” (“VCR” will light on the multi-function display).
Only for Hi-Fi model
• If necessary, set “SAP” on the SET UP–selection screen. (See Mode Selection.)
SIMPLE RECORDING TIMER
Simple Recording Timer
Example: Recording a TV programme in the SP mode. The programme is on Channel 2, ending at 9:50 AM.
The present time is 8:43 AM.
! Select the desired channel with the numbered buttons or
CH ∂/ƒ.
Ex.: Channel
→
02
@ Set the recording speed (SP or EP) with TAPE SPEED on
the remote control.
Ex.: SP
# Press REC to enter the recording mode.
Then, press REC again to enter the simple recording
timer mode. The recording stop time is displayed.
Ex.: 8:50 AM
$ Each press of REC increases the stop time by 10
minutes.
Ex.: 9:50 AM
% When the stop time comes, recording is finished and the power turns off.
02
Recording Speed
SP STOP 8:50AM
02
02
SP STOP 9:50AM
• The Simple Recording Timer has priority over other
recordings.
• Ordinary timer programmes will not be recorded when
portions of the time setting of the simple recording timer
and of the time setting of the ordinary timer recording
overlap.
Changing the Contents of the Simple Recording Timer
! Press REC. The stop time flashes on the TV screen.
@ Change the stop time as desired using REC.
Cancelling the Simple Recording Timer
! Press STOP.
Example:
9:00 10:00
Ordinary timer recording
(9:30 AM to 10:30 AM)
Simple Recording Timer
(9:00 AM to 10:00 AM)
NOT
recorded
Record-
ed
Recorded
11:00 12:00
To Next Page
Loading...
