Sharp VIEWCAM VL-SD20S - Setting the Area, Date and Time

VL-SD20S-GB/pp. 008-016; 99/8/10/18:00
G. K. Associates, Tokyo
Preparation
Preparation
15
Setting the Area, Date and
Time
Example: Setting the date to 2 June 2000
(2. 6.2000) and the time to 10:30 am (10:30)
in Paris.
Notes:
• Before performing the procedure below, make
sure that the lithium battery has been installed
(see page 13).
• If you are in an area that observes summer time,
set the time to the standard time. You can then
correct for summer time by performing the
procedure on page 56.
3 Press the MENU button (C) to display
the menu screen.
4 Press the SET button (B) until “2
PARIS” appears.
Note: See pages 57 and 58 for the area
number and name of the representative city
for your time zone.
5 Press the D button (C) (Q) to select
“SETTING”, then press the SET button
(B) (W).
6 Press the C or D button ( or C) to
select “2” (day), then press the SET
button (B).
7 Press the C or D button to select “6”
(month), then press the SET button.
1 Hold down the Lock
button and slide the
Power switch to
CAMERA.
2 Press the CONTROL switch until
appears.
SP
EFF.
PIC.
MENU
AUTO
TURE
PIC
- SCENE
MENU
----------
EXIT
AREA PARI S
SUMR T IME
DISPLAY
SETTING
2
OFF
OFF
----------- 2
SET
SET
MENU
CONTROL switch
Power switch
Operation buttons
Lock button
SETT ING
9991
00
6
0
.2.
9991
00
1
0
.2.
SETT ING
EXIT
AREA LONDON
SUMR T IME
DISPLAY
SETTING
1
OFF
OFF
----------- 2 ----------
SET
MENU
MENU
SET
EXIT
AREA PARIS
SUMR T IME
DISPLAY
SETTING
2
OFF
OFF
SET
MENU
9991
00
1
0
.1.
----------- 2 ----------