VL-SD20S-GB/pp. 064-068; 99/8/18/18:00
G. K. Associates, Tokyo
Advanced Features
Advanced Features
Playback
67
If you wish to change the dubbed audio
or dub additional scenes
1 Press the EXIT button (MODE
DISPLAY) to turn off the audio dubbing
screen.
2 Press the CONTROL switch until
appears.
3 Repeat steps 1 to 5 above.
Notes:
• We recommend that you use the audio dubbing
feature only with recordings made with the
VIEWCAM. Use of recordings made with other
digital camcorders may result in poor audio
quality.
• Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to 16-
bit mode or vice versa. Press the START button
(B) to resume operation.
• Audio dubbing will automatically stop if a portion
recorded in LP mode is encountered.
• You can play back the dubbed audio and the
original audio together or separately (see
“Selecting the Audio Playback Mode” on next
page).
Audio Dubbing
Note:
• Audio dubbing cannot be used with recordings
made in LP mode.
1 Play back the recorded Mini DV cassette
and locate the tape position where you
wish to start audio dubbing.
2 Press the PLAY/STILL button ( ) to
pause playback.
3 Press the CONTROL switch until
appears.
4 Press the AUDIO DUB. button ( ) to
display the audio dubbing screen.
5 Press the START button (B)
to begin audio dubbing.
Record your narration.
AUD I O DUB.
START
STOP EXIT
DUB.
AUDI O
SP
AUD I O 1
+
2
START
SP
ARCHZOOM
AUD I O 1
+
2
DUB.
AUDI O
PB SE
-
To pause audio dubbing
Press the STOP button (A).
To quit audio dubbing
Press the EXIT button (MODE DISPLAY). The
audio dubbing screen will disappear.
To Next Page
Loading...
