Sharp VIEWCAM VL-SD20S - Windbreak; Selecting Summer Time

VL-SD20S-GB/pp. 048-058; 99/7/28/18:00
G. K. Associates, Tokyo
Advanced Features
56
Selecting Summer Time
Perform the procedure below to advance the
clock of the VIEWCAM one hour to summer
time.
1 In Recording Standby mode, display the
menu screen (see page 25).
2 Toggle the CONTROL switch to select
“SUMR TIME”.
3 Press the CONTROL switch to select
“ON”.
• The time automatically changes to
summer time.
4 Press the EXIT button (MODE
DISPLAY) to turn off the menu screen.
• The indicator appears when the date/
time is displayed.
To reset to standard time
Select “OFF” in step 3 above.
EXIT
AREA PARI S
SUMR T IME
DISPLAY
SETTING
2
DATE T IME+
OFF
----------- 2 ----------
MENU
SET
00026.2.
0301
EXIT
AREA PARI S
SUMR T IME
DISPLAY
SETTING
2
DATE T IME+
ON
----------- 2 ----------
MENU
SET
00026.2.
0311
EFF.
PIC.
MENU
AUTO
TURE
PIC
- SCENE
MENU
SP
0002
03
6
11
.2.
EXIT
Windbreak
The windbreak function allows you to reduce
annoying noise from strong winds when
recording.
1 In Recording Standby mode, display the
menu screen (see page 25).
2 Toggle the CONTROL switch (Q) to
select “WIND”, then press the
CONTROL switch (W) to select “ON”.
3 Press the EXIT button (MODE
DISPLAY) to turn off the menu screen.
To cancel Windbreak
Press the CONTROL switch to set the WIND
menu item to “OFF” in step 2 above.
Note:
• Keep the windbreak function off during normal
recording. If it is left on, the recorded audio may
sound somewhat altered when played back.
EXIT
REMOTE
WIND
DEMO
LANGUAGE
MODE
----------- ---------- 1 ----------
SET
MENU
ON
OFF
ON
AUDIO MODE 12BIT
Summer time
indicator