VL-SD20S-GB/pp. 020-022; 99/8/18/18:00
G. K. Associates, Tokyo
20
Playback
The LCD monitor screen makes it possible to
play back and see what you have just
recorded. Nothing needs to be connected,
allowing instant on-screen playback with the
sound through the built-in speaker.
1 Hold down the Lock button and slide the
Power switch to VCR.
• The screen appears.
2 Press the REW (C) (or FF [B]) button
to rewind (or fast forward) the tape to the
desired point.
3 Press the PLAY/STILL button ( ) to
begin playback.
To Stop Playback
Press the STOP
button (A).
Notes:
• If you wish to turn the Operation button
indicators on or off, press the MODE DISPLAY
button. The Playback Operation buttons will still
function as indicated even after the indicators
are turned off.
• To use the infrared remote control, make sure
that the REMOTE menu item is set to “ON” (see
page 38).
Auto Tape Rewind
The tape is automatically rewound when
playback reaches the end of the tape.
To Turn the Power Off
Slide the Power switch to OFF.
Volume Control
While the VIEWCAM is in VCR mode, push the
Volume control to the ` or 1 side to increase
(Q) or decrease (W) the volume to your
preference.
The volume level indicator will appear on the
screen during adjustment only. When the
Volume control is released, the volume level
indicator will disappear shortly afterwards.
Basic Operations
Playback
Power switch
LCD monitor screen
Operation buttons
To Next Page
Loading...
