L-PD3U
8 .
. Remove the screw ((U)LX=HZ0013TAFF)(l PC.) fixed the jogholder
and the lens unit.
Remove the connector of main P.W.B. and remove to lift V/F unit.
. Remove the screws ((U)LX-HZ0013TAFF)(2pcs.) and VCR P.W.B..
10
.
l Remove thescrews ((A)LX-HZ0050TAFF)(3pcs.) and joint P.W.B..
11 .
l Turn to a right angle the shaft of the LCD tilt unit section, turn the
LCD tilt unit and it is perpendicular to the LCD cabinet.
~ l Remove the fixing screws ((G)XiPSN17P03000)(5pcs.), ((D)
XiPSF17P03000)(2pcs.) and LCD cabinet.
13 .
Remote
receiver
l Remove the floating screws ((I)LX=BZ0032TAFD)(2pcs.), ((S)
LX-BZ0225TAFF)(l PC.) and ((T)LX=BZ0231TAFE)(l PC.) ant
mechanism section .
<Screws
A LX-HZ0050TAFF Ml .7x4 Black
B LX-HZ005OTAFN Ml .7x4 Silver
1 C 1 XiPSF17PO4000 1 Ml .7x4 Black
D XiPSF17PO3000 Ml .7x3 Black
F XiPSN17PO4000 Ml .7x4 Silver
G XiPSNl7PO3000 Ml .7x3 Silver
H XiPSN17PO2000 Ml .7x2 Silver
I LX-BZ0232TAFD Floating screw B
Q LX-HZ0017TAFF M2x8 Black
R XiPSN16PO5000 Ml .6x5 Silver
I S I LX-BZ0225TAFF I Floating screw Black
I
T LX-BZ0231TAEE Floating screw A Silver
U LX-HZ001 3TAFF
Ml .7x6 Black
l Remove the LCD tilt fixing screws ((Q)LX-HZ0017TAFF)(2pcs.)
and LCD cabinet unit.
42
I
To Next Page
Loading...
Need help?
General
