What causes hissing noise during AM reception on Sherwood RD-8601 Receiver?
To address continuous or intermittent hissing noise during AM reception on your Sherwood Receiver, especially at night, keep the receiver away from noise sources such as motors or fluorescent lamps. You might also consider installing an outdoor AM antenna. The noise is likely caused by motors, fluorescent lamps, or lightning.
Why don't other Sherwood components react to remote control commands?
If other Sherwood components aren't reacting to remote control commands, ensure that the DIGI LINK connections are properly made.
Why is the OSD function not available on my Sherwood RD-8601?
If the OSD (On-Screen Display) function is not available on your Sherwood Receiver, ensure that the video connections between the unit and the TV monitor are correctly made.
Crucial instructions and warnings to read before operating the audio/video receiver.
Important safety precautions for operating the receiver, including electrical and environmental considerations.
Details on FCC compliance for digital devices and guidelines to prevent radio interference.
Guidance for CATV system installers regarding proper grounding connections.
Instructions for connecting FM and AM antennas for optimal reception.
Guide to connecting various video sources like DVD players and VCRs.
Instructions for connecting audio sources like CD players and tape decks.
How to connect external components with multi-channel audio outputs.
Connecting digital sources and recorders via optical or coaxial ports.
Connecting Sherwood components using the DIGI LINK system.
Connecting a powered subwoofer to enhance bass response.
Properly connecting speakers to the receiver for correct sound output.
Recommendations for positioning front and center speakers for optimal sound.
Guidance on placing surround speakers for an immersive audio experience.
Instructions for positioning the surround back speaker for enhanced surround effects.
Advice on placing the subwoofer for powerful bass reproduction.
Explanation of indicators and information shown on the receiver's front display.
Information on operating Sherwood components with the DIGI LINK system.
Chart detailing the functions of remote control buttons for various device types.
Steps for operating external audio and video components using the remote.
Specifications for the effective range and angle of the remote control.
Instructions for replacing and maintaining batteries in the remote control.
Guidance on selecting speaker size settings based on frequency response capabilities.
Explanation of setting speaker distances for accurate surround sound delay.
How to select and listen to various audio and video input sources.
Guide to selecting and using different surround sound modes for an enhanced experience.
Instructions for tuning and listening to FM and AM radio stations.
Procedures for recording audio and video signals onto tape or other media.
Steps for high-quality digital audio recording using an MD recorder or CD recorder.
Details on additional features like dynamic range compression and sleep timer.
Displays current operating status like input source and volume level.
Overview of accessing and performing setup procedures via the on-screen display menu.
Performing speaker setup adjustments through the OSD menu.
Selecting digital inputs, video sources, or tone controls via the OSD menu.
Selecting desired surround sound modes through the OSD interface.
Adjusting channel levels and memorizing settings via the OSD.
Configuring the automatic display of status information on the monitor TV.
Technical specifications for the receiver's amplifier, including power output and distortion.
Technical details for digital audio inputs, sampling frequencies, and levels.
Technical specifications for video inputs, formats, and signal levels.
Specifications related to the FM tuner's performance and sensitivity.
Specifications for the AM tuner's tuning range and sensitivity.
General specifications including power supply, dimensions, and weight.
Setup codes for programming the remote control to operate TV devices.
Setup codes for programming the remote control to operate VCR devices.
Setup codes for programming the remote control to operate Cable Box devices.
Setup codes for programming the remote control to operate DVD players.
To Next Page
General
