Shimadzu ATY224R User Manual

BEFORE
WEIGHING
MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
USING MORE CONVENIENTLY
89
V
Continued on next page
When setting the reference as a percentage of your choice…
3
Select the specic percentage
reference.
[OPTION] [SET]
(Check the indication.)
The indication differs depending on whether a
reference value has already been set or not.
When no percentage reference value has been set
[---]
When a percentage reference value has already been set
(The percentage reference value is displayed.)
•
To update the percentage reference value, proceed to step 4.
•
If you are not updating the percentage reference value, the following steps are not necessary.
^ "Weighing Percentages", page 90
4
Place the container on the pan
and press
The balance will be tared.
5
Enter a percentage value of your
choice.
[OPT REF]
(Enter the percentage value.)
^
"Entering Numerical Values", page 45
6
Place the sample that is to
provide the reference weight in the
container.
7
Check that (the stability mark)
lights up, then conrm.
[SET]
A percentage value calculated by conversion on
the basis that the reference weight is equal to
the set percentage is displayed.
Percentage weighing is now possible.
^
"Weighing Percentages", page 90
!O!P!T!I!O!N
! !S!E!T!
O!P!T! !R!E!F
! ! !5!0.0!0
O!P!T! !R!E!F
/
/
/
/
/
/
/
/
/
/
/
/
/
/
! !S!E!T!
! ! !5!0.0!0
The specic percentage weighing symbol lights
up.

Shimadzu ATY224R Specifications

General

Brand	Shimadzu
Model	ATY224R
Category	Scales
Language	English