45
Installation/removal
Installing the battery mount
4. Install the latch base to the upper bracket.
BM-E8030
First install the key cylinder to the latch base. Key cylinders are not included with
SHIMANO products.
1 N·m
Mounting screw
Key cylinder
Latch base
2 N·m
Latch base mounting screw B
1 N·m
Latch base mounting screw A
BM-E8031
After installing the latch base, adjust the installation height of the unlock pin unit if
necessary.
1 N·m
Latch base mounting screw A
0.8 N·m
Position adjustment
screw
2 N·m
Latch base mounting screw B
To Next Page
Loading...
