16
SHIMANO STEPS logo screen
This screen is displayed during system start up and
shutdown.
For SC-E6100, the screen shown on the right is displayed
when the battery level is low.
EW-EN100
The LED2 turns ON.
LED2
Basic screen display
Displays the status of the power assisted bicycle, traveling data.
The cycle computer screen is shown as follows in this owner's manual.
•
The SC-E8000 screen is used when explaining SC-E8000, SC-E6010, SC-E6100, and SC-E7000, except in cases where the cycle
computer display is significantly different.
•
The SC-E8000 screen is used when explaining SC-E8000 and SC-E7000, except in cases where the cycle computer display is
significantly different.
•
The SC-E6100 screen is used when explaining SC-E6010 and SC-E6100, except in cases where the cycle computer display is
significantly different.
To Next Page
Loading...
