22
Switching to [WALK] mode (walk assist mode)
• If Assist-Y is not pressed for one minute or more, the mode active before [WALK] mode was set, is re-activated.
• If the bicycle is not moved after [WALK] mode is activated, walk assist is automatically inactivated. To re-activate [WALK] mode, momentarily
release Assist-Y and then hold down Assist-Y.
• The walk assist function can operate at a maximum of 6 km/h.
• The assistance level and speed vary with the gear position.
• The intelligent walk assist function activates when an electric shifting system such as XTR, DEORE XT SEIS is connected.
System individually supplies assist power to detect gear position.
"Intelligent walk assist" support rider more torque output in steep climb condition in lower side gears.
"Quick walk assist" function works quickly by holding down SW from any mode.
To Next Page
Loading...
