23
Switching to walk assist mode
*
The Walk assist mode function may not be able to be
used in certain regions.
1.
With your feet off the pedals and current speed at [0
km/h], hold down Assist-Y until [WALK] displays.
•
EW-EN100: LED1 lights up blue.
Y
Y
Assist
NOTICE
A warning tone will sound while switching is in
progress if it is not possible to switch to [WALK] mode
because the current speed is not [0 km/h] or there is
pressure on the pedals etc.
SC-E8000
SC-E6010
EW-EN100
Assist OFF
Walk assist mode
enabled
LED1
To Next Page
Loading...
