30
Switching the travel data display (SC-E7000)
*
The Walk assist mode function may not be able to be
used in certain regions.
The type of travel data displayed changes each time you
press Assist-A or the cycle computer's function button.
Assist
A
Function button
< Current speed display >
(A)
Current speed
(B)
Traveling distance
(C)
Cumulative distance
(D)
Traveling range *1
(E)
Traveling time *2
(F)
Average speed *2
(G)
Maximum speed *2
(H)
Number of crank rotations *2*3
(I)
Current time *2
(A) Current speed
(B) [DST] [CLK] (I)
(C) [ODO] [CAD] (H)
(D) [RNG] [MAX] (G)
(E) [TME]
[AVG] (F)
*1 The traveling range should be used as a reference only.
*2 Optional item: You can configure the display settings in E-TUBE PROJECT.
*3 Cadence is only displayed when pedaling is assisted while using electronic gear shifting.
To Next Page
Loading...
