Shimano Steps E8000 Series - Switching the Travel Data Display (SC-E8000;SC-E6010)

26
 Switching the travel data display (SC-E8000/SC-E6010)
* The Walk assist mode function may not be able to be
used in certain regions.
The type of travel data displayed changes each time you
press Assist-A or the cycle computer's function button.
Assist
A
Function button
(A) Traveling distance
(B) Cumulative distance
(C) Traveling range *1, 2
(D) Traveling time *3
(E) Average speed *3
(F) Maximum speed *3
(G) Number of crank rotations *3
(H) Current time *3
(A) [DST] [CLOCK] (H)
(B) [ODO] [CADENCE] (G)
(C) [RANGE] [MAX] (F)
(D) [TIME] [AVG] (E)
*1 When [RANGE] is displayed, the battery level is not displayed. The traveling range should be used as a reference only.
*2 When walk assistance is functioning, the on screen display [RANGE] changes to [RANGE ---].
*3 Optional item: You can configure the display settings in E-TUBE PROJECT. For details, refer to the "Connection and
communication with devices." section.
*4 Displayed constantly on SC-E6010.
NOTICE
When traveling data is displayed, the screen returns to speed display after 60 seconds.
When speed data is displayed, pressing Assist-A or the function button changes the traveling data displayed starting
with [DST].