28
Switching the travel data display (SC-E6100)
*
The Walk assist mode function may not be able to be
used in certain regions.
The type of travel data displayed changes each time you
press Assist-A or the cycle computer's function button.
Assist
A
Function button
Travel data
display
(A)
Traveling distance
(B)
Cumulative distance
(C)
Traveling range *1
(D)
Traveling range for each assist mode *1*2*3
(E)
Traveling time *3
(F)
Average speed *3
(G)
Maximum speed *3
(H)
Your crank rotation speed *3 *4
(A) [DST] [CADENCE] (H)
(B) [ODO] [MAX] (G)
(C) [RANGE] [AVG] (F)
(D) [RANGE] [TIME] (E)
*1 The battery level is not displayed while displaying the traveling range. The traveling range should be used as a
reference only.
*2 This data is displayed as follows. Gear shifting mode and gear position are not displayed.
*3 Optional item: You can configure the display settings in E-TUBE PROJECT. For details, refer to the "Connection and
communication with devices."
*4 Cadence is only displayed when pedaling is assisted while using electronic gear shifting.
To Next Page
Loading...
