27
Clearing the traveling distance (SC-E8000/SC-E6010)
You can clear the traveling distance in the main screen.
1.
Change the traveling data display to [DST] and press
Assist-A for 2 seconds.
2.
Release the finger when the [DST] indication starts
blinking.
In this state, pressing Assist-A again clears the
traveling distance.
• The [DST] indicator light stops blinking and the screen takes
you back to the basic screen after leaving it alone for 5
seconds.
• When the traveling distance is cleared, [TIME] (traveling
time), [AVG] (average speed), and [MAX] (maximum speed)
are also cleared.
To Next Page
Loading...
